Refill the cooling system capacity

Refill the cooling system capacity
Notes:
• In a petrol tank includes a tank heater ¬ Xia interior of the car (if applicable)
• There are constant changes in ¬ coolants based on ethylene glycol (recom ¬ mended glycol in the coolant within the limits of 50% to 70%)
• Use coolant alcohol-based is not allowed
• The basis of the coolant (ethylene glycol) can be mixed only with demineralized or distilled water.
Filling capacity: 4A-F
ILAC for Europe 5.2 L
ILAC (the rest) 5.6 L
AKPP.5,5L 4A-FE:
AE92, AE95. 6,1-6,2 l
AT171 5.6 L
AT180. 5.2 L
AE101 5,0-5,3 l
AT190. 5,3-5,4 l
5A-FE 5,2-5,3 l
7A-RE_5 ,2-5, 5 x 4 A-OE
AE92, AT160. 6.0 liters
A number 1 12.4 L
Check the level and quality of the coolant
1. Check the coolant level to its level in the expanded ¬ relatively tank. At a low level to establish, yc ¬ leaks and top off fluid ¬ bone.
2. Check the quality of the coolant. The liquid should not be with ¬ hold traces of rust, scale and oils in the area of ??the filler neck. When pollution and in contact with liquid butter substitute.
Replace coolant
(Models AE and AT)
1. Remove the filler throat ¬ HN radiator.
Caution: Be careful when removing the cork from the hot engine.
2. To drain the coolant, remove the drain plugs:
(5A-FE)
Radiator drain plug (with a right hand curve ¬ in the lower reservoir pa ¬ diatora) and the drain plug of the cylinder (left side in the anterior part ¬ ne unit). (4A-FE (AE101 and AT190))
(4A-F, 5A-F and 4A-FE (AE92. AE95, AT171 and AT180) the drain plug.
(4A-DE) the drain plug.
Radiator drain plug and drain plug ¬ nuyu cylinder (right side in front of the unit).