вторник, 12 июля 2011 г.

Check site electrum ¬ tilyatora elements and systems we manage ¬ electrum-tilyatorom (AI)

Check site electrum ¬ tilyatora elements and systems we manage ¬ electrum-tilyatorom (AI)
1. Check the temperature sensor oh ¬ lazhdayuschey fluid (ny-located on the left side of the radiator), ¬ Meribah of resistance to his conclusions. The nominal value of the resistance of ¬ is:
Approximately 1.35 ohms. at 85 ° C
Approximately 1.19 ohms. at 90 ° C
Approximately 1.05 ohms. at 95 ° C
Resistance by the non nominal values ??replace the sensor.
2. Check the relay number 1, located: in theblock connector number 5 in the front office ba ¬ gazhnom (see "Checking the relay electric fan system of cooling).
3. Check the relay number 2, located in the block-ing connector number 5 in the front luggage compartment (located scheme-tion relay the findings presented in the figure).
a) Verify the electrical circuit re ¬ le, using an ohmmeter, and verify:
• in the presence of conduction between terminals "2" and "6", "1" and "3";
• in the absence of conduction between the pin ¬ dy "1" and "4".
b) Check the relay using ¬ Zuya ohmmeter and rechargeable bat ¬ Rhea, bring tension to the conclusion that the ladies ¬ "2" and "6" relay and you will see that.
• in the absence of conduction between the pin ¬ dy "1" and "Z";
• in the presence of conduction between the terminals "1" and "4".
In case of default of these conditions, replace the relay.
Potential problems and their causes and methods of eliminating
Problem Possible cause Solution
Engine overheats • Check the coolant level.
• Loose or broken belt drive pump cooling ¬ giving liquid.
• Contamination of the radiator.
• Drain the coolant through leaks in hoses, pump, radiator, thermostat housing, pro ¬ clutch cylinder head.
• Faulty thermostat.
• Late ignition.
• Faulty electrical part of the cooling system.
• Blocked or corrosion of hoses radiator.
• Faulty water pump.
• Blocked radiator pipes or faulty fuel cap radiator.
• Blockage of channels in the block and cylinder head. • Top up if necessary.
• Adjust the belt tension or replace it.
• Clean the radiator.
• Repair if necessary
• Check the thermostat.
• Turn the ignition.
• Check electrical connections.
• Replace the hoses.
• Replace the pump.
• Check the radiator cap or filler cap it.
• Repair if necessary

Комментариев нет:

Отправить комментарий