Check spark plugs

Check spark plugs
Using a special key, weighted ¬ filamentary spark plugs. Gently under ¬ side electrode gibaya candles dobey ¬ Tes necessary size of the gap. Note: The types of used light ¬ whose ignition and the necessary clearances were rank ¬ see "System for ¬ bandits"
Check drive belts mounted units
1. Visually check for cracks or damage to the belt, its traction and wear, as well as from the presence of trapped particles ¬ oil. Check the fit of the belt pulley.
Note: The presence of crackson the edge of the seat belt is admissible ¬ mym. However, if you have painted ¬ Bani belt should be replaced.
2. (4A-FE, 5A-FE, 7A-FE and 4A-GE (AE92, AM11 iAT160)) Check and adjust tension ¬ tion of the generator drive belt and coolant for Sosa. When ¬ lozhite force 98 N at the site rem ¬ AEs midway between the pulleys when the generator and water ¬ pump cooling ¬ giving fluid, as shown and check the belt deflection. Typical values ??are given in the table "belt deflection engines 4A-RE5A-PE, 7A-PEu 4A-GE (AE92, AM11 and AT160)."
If the belt deflection is beyond the UCA ¬ zannye limits, adjust the tension ¬ mapping belts.
a) Remove the right cover protect the engine.
b) Adjust the tension of the belt releasing the lock nut (A) and ¬ vorachivaya adjustment bolt (B)
a) Tighten the lock nut (A) Torque the lock nut (A) drive belt tensioner:
If the belt deflection is beyond the specified limits ¬ nye, adjust the tension ¬ tion belt by releasing the locking bolt and turning the adjusting bolt.
Adjust the belt tension at ¬ water generator and pump cooling ¬ giving liquid.
Generator and coolant pump 47 Nm air conditioning compressor and pump hydraulic ¬ ca. 39 Nm
(4A-OE (LE101, LE111)) Check and adjust the tension of belts. The deflection of the drive belts under the efforts of 98 N is measured at points A and B as shown in the figure. Typical values ??are given in the table "belt deflection engines 4A-GE (AE101, AE111)